HPLC Columns
Sepax Technologies Inc Sepax HPLC Column PolyRP-100, 5 µm, 4.6 x 100 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Sepax Technologies Inc Sepax HPLC Column Proteomix SAX, NP1.7 PEEK, 2.1 x 50 mm
Sepax HPLC Column Proteomix SAX, NP1.7 PEEK, 2.1 x 50 mm
Sepax Technologies Inc Sepax HPLC Column PolyRP-1000, 5 µm, 4.6 x 250 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Sepax Technologies Inc Sepax HPLC Column Bio-C8, 5 µm, 300 Å, 2.1 x 100 mm
Bio-C8 phase is made of monomeric and fully endcapped chemistry. The uniform stationary phase allows the separation to achieve high selectivity and high efficiency. Bio-C8 packings of 300 Å pore size selection are ideal for high resolution mapping of peptides and separation of natural and synthetic peptides and small proteins.
Sepax Technologies Inc Sepax HPLC Column Mono GPC-500, 10 µm, 7.8 x 300 mm
Mono GPC resin is designed for high resolution separation of synthetic polymers. The porous resin is made of highly cross-linked polystyrene divinylbenzene (PS/DVB) polymer with narrow-dispersed particle distribution. The uniformed pore size distribution provides accurate linear relationship between the retention time and molecular weight during the separation. Highly cross-linked porous PS/DVB also provides excellent chemical and physical stability, so the molecular weight calibration curve and column efficiency show minimum change with different organic solvents. With large pore volume, Mono GPC resin offers high resolution for polymer separation. Mono GPC resin is available with single pore size or multi pore sizes mixture.
Sepax Technologies Inc Sepax HPLC Column PolyRP-100, 5 µm, 2.1 x 250 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Sepax Technologies Inc Sepax HPLC Column Mono GPC-100, 10 µm, 7.8 x 300 mm
Mono GPC resin is designed for high resolution separation of synthetic polymers. The porous resin is made of highly cross-linked polystyrene divinylbenzene (PS/DVB) polymer with narrow-dispersed particle distribution. The uniformed pore size distribution provides accurate linear relationship between the retention time and molecular weight during the separation. Highly cross-linked porous PS/DVB also provides excellent chemical and physical stability, so the molecular weight calibration curve and column efficiency show minimum change with different organic solvents. With large pore volume, Mono GPC resin offers high resolution for polymer separation. Mono GPC resin is available with single pore size or multi pore sizes mixture.
Sepax Technologies Inc Sepax HPLC Column PolyRP-100, 10 µm, 4.6 x 150 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Microsolv Technology Corporation HPLC Column, Amide, 4um, 2.1mm ID x 50mm Length, 100A. 1 EA.
This Cogent Amide HPLC Column is made with Cogent TYPE-C™ Silica , and this silica hydride based stationary phase provides excellent Selectivity, Faster Equilibration and Robust Column Lifetimes. Chosen for analysis of Sugars and other Analytes with amine groups, This size column provides short run times but requires a pump that can precisely deliver, and a flow cell that made for, reduced flow rates with lower volumes. This column size is excellent, and a favorite for LCMS.
Microsolv Technology Corporation HPLC Column, Bidentate C8, 4um, 2.1mm ID x 100mm Length, 100A. 1 EA.
This Cogent Bidentate C8™ HPLC Column is made with Cogent TYPE-C™ Silica , and an aliphatic hydrocarbon chain with 8 carbon atoms. This silica hydride based stationary phase provides excellent Selectivity, Faster Equilibration and Extremely Robust Column Lifetimes. This is not a typical C8 column and it can produce unique selectivity and retain compounds that normally do not retain on other C8 columns made with standard silica. The hydrophobic 4um, particle and two points of attachment with direct silicon-carbon bonds, makes this column more hydrophobic than other C8 columns and less hydrophobic than the Bidentate C18, yet it can retain some hydrophilic compounds as well if desired. This column can also be used at very low pH (below 2) with no damage to the column, among many other unique benefits. This column is very popular and often chosen for LCMS when increased resolution is desired.
Microsolv Technology Corporation HPLC Column, Diol 2.o, 2.2um, 2.1mm ID x 150mm Length, 120A. 1 EA.
This Cogent Diol 2.o™ HPLC Column is made with Cogent TYPE-C™ Silica , and this smaller particle, silica hydride based stationary phase provides Increased Efficiency, Excellent Selectivity and Faster Equilibration. Considered "Near UHPLC", this column can be used on any HPLC Instrument and still deliver improved efficiency. Chosen for analysis of polar compounds that are difficult to retain in Reversed Phase, including amino acids and other biological compounds such as metabolites. When using in Aqueous Normal Phase, this column is considered a Mass Spec Friendly Column. This short and narrow bore column provides short run times but requires a pump that can precisely deliver, and a flow cell that is made for, reduced flow rates with lower volumes.
Microsolv Technology Corporation HPLC Column, Silica-C 2.o, 2.2um, 2.1mm ID x 50mm Length, 120A, High Pressure. 1 EA.
This Cogent Silica-C™ “near UHPLC”, HPLC Column is made with 2.2um, 120A, Cogent TYPE-C™ Silica , and this silica hydride based stationary phase. Chosen for analyzing compounds that are not soluble in Water including but not limited to: lipids, peptides, proteins, oligonucleotides and other compounds that require non polar solvents. Faster equilibration than other Silica columns, no need to control moisture in mobile phase solvents and robust column lifetimes This short and narrow bore column provides short run times but requires a pump that can precisely deliver, and a flow cell that made for, reduced flow rates with lower volumes.
Microsolv Technology Corporation HPLC Column, Phenyl Hydride, 4um, 4.6mm ID x 100mm Length, 100A. 1 EA.
This Cogent Phenyl Hydride HPLC Column is made with Cogent TYPE-C™ Silica , and this silica hydride based stationary phase provides excellent Selectivity, Faster Equilibration and Robust Column Lifetimes. Chosen for analysis of compounds with aromatic rings that are difficult to retain or separate in Reversed Phase, including aromatic amines, small peptides and azides. This size column is often used when shorter run times are needed but 50mm long columns do not provide enough resolution.
Sepax Technologies Inc Sepax HPLC Column Proteomix WAX, NP1.7 PEEK, 2.1 x 50 mm
Sepax HPLC Column Proteomix WAX, NP1.7 PEEK, 2.1 x 50 mm
Sepax Technologies Inc Sepax HPLC Column Zenix-C SEC-80, 3 µm, 7.8 x 50 mm
Zenix™-C SEC phase, developed based on innovative surface coating technology, comprises of uniform, hydrophilic, and neutral nanometer thick film chemically bonded to high purity and mechanically stabilized silica. Zenix™-C, uses lay-down monolayer on porous silica as oppose to Zenix of stand-up monolayer, offers ideal phase chemistry for hydrophobic samples like insulin, membrane protein monoclonal antibodies derivatized with polymer branches (polypeptide or PEG) separation. The 3µm based packing material allows for high resolution and performance separation.